Installation

Enter your item's SKU number to find its installation video

Seat Cover Installation

1 Minute Car Front Bucket Seat Covers Installation

Shop Featured Item

Download PDF

Customer questions

Question:
Q:How do you install a full back seat cover with a arm rest
Answer:
A:Thank you for your inquiry. If the arm rest goes up and down, the seat cover should be able to fit around it the armrest while installing. If the armrest is on the side, it should be able to go up and down, but will not be covered. If the armrest is in the middle, you do need a split bench seat cover and may have to unzip the cover to let it out. Again, it will not be covered.
Question:
Q:What do I do with the metal clips? This is not covered in the video!
Answer:
A: Thank you for your inquiry. The metal clips are to secure the seat cover better. You would use the straps on the side. Hook the clip to the strap and then under the seat, hook it all the way to the other side. Repeat this for the opposite side of the seat.
Question:
Q:Head rest does not come off on back seat
Answer:
A: Thank you for your inquiry. Mostly all our seat covers do require removable headrests for the rear seats for proper installation. If yours do not remove, please see items PU205115 & FB201115.
Question:
Q:What are the metal clips for..purchased flat cloth bucket seat covers...thanks
Answer:
A: Thank you for your inquiry. The metal clips are to help secure your seat covers. You would use them to attach the straps under the seat from one side to the other.
Question:
Q:I have built in seatbelts at each corner how do I install?
Answer:
A: Thank you for your inquiry. If you have built-in seat belts you would have to purchase seat covers that will accommodate. Please see this installation video and link to one of our built-in seat covers. https://www.youtube.com/watch?v=R9Qpki_nC5A https://www.fhgroupauto.com/product/all-purpose-built-in-seat-belt-pu-leather-seat-covers/
Question:
Q:Installing in 1998 Mazda protege having problems with back seat
Answer:
A: Thank you for your inquiry. Please contact our customer service team at 201-210-2426 or [email protected] for more help.
Question:
Q:What are these little s hooks for? On the car seat covers
Answer:
A: Thank you for your inquiry. The hooks are for additional security when installing your seat covers. The straps on the sides of your seat covers (depending on which ones you have) can be attached to the hooks which can be hooked onto the bottom of your seat.
Question:
Q:2017 Ford Transit Van. FB060102GRAY seat cover. There is a moveable armrest on the inside side of the seat. How do I install the seat cover, and still use the armrest? Can I cut a hole in the fabric at the pivot point of the arm rest, and push the armrest through the hole, then install the cover over the back of the seat?
Answer:
A: Thank you for your inquiry. It is best that you have removable armrests to install your seat covers properly. Should you feel you can make this work by cutting a small slit for your armrests, they are yours to with as you please, however, please be aware that once they are cut, we cannot accept the return.
Question:
Q:Can these covers be put in the washing machine?
Answer:
A: Thank you for your inquiry. The specific seat covers in this video can be put into the wash on a gentle cycle and air dried. There are some items you cannot wash. If you'd like to be sure, please contact us at [email protected] or 201-210-2426 so we can give you more information about the seat covers you may have.
Question:
Q:Do you have a video for a 2014 ford fusion for the front seats
Answer:
A: Thank you for your inquiry. Our seat covers are universal fits designed to fit many different vehicles. We do not have videos for specific cars as the installation process is generally the same. Some cars may have different features that will require extra steps, however, we do not have currently have videos showcasing every feature. Please feel free to contact our Customer Support team for further assistance 1-800-928-5518
Question:
Q:My front seats do not have a opening in the back between the bottom and backrest so I am unable to put the strap thru and secure underneath. What do I do?
Answer:
A: Thank you for your inquiry. Our seat covers are semi custom fit and are not designed to custom fit any vehicle. If you do not have an opening in the crevice of your seat, you can tuck the seat covers in on the sides and if there is anything the straps can be secured to you can use those to hold the cover in place.
Question:
Q:I need a seat cover for a high back bucket seat with an armrest. What do you recommend? Thank you
Answer:
A: Thank you for your inquiry. The only options we have for a high back cover with built in arm rests are our seat cushions. https://www.fhgroupauto.com/product/premium-car-seat-cushions-front/
Question:
Q:I bought the set mainly for my driver seat on a 2001 Buick century. My front seat has a console sized middle section attached to it. Is there a separate kind for that style? So far I’ve attached the straps as best as I can to create a snug fit but it’s still somewhat compromised on the middle side since the corner elastic has nowhere to go. Please advise. Thanks!
Answer:
A: Thank you for your inquiry. Unfortunately, we do not have a cover for the console of the bucket covers. Please keep in mind we do not guarantee a perfect fit since these covers are semi customized for a universal fit.
Question:
Q:what to do if the head rest don't come off?
Answer:
A: Thank you for your inquiry. Most of our covers are compatible with removable head rests. Unfortunately, if you did not order a cushion set, then the seat covers will not be compatible with your vehicle's seats. You can contact us at 1-800-928-5518 for further assistance.
Question:
Q:I have a 2019 Ford E350 with high back bucket seats with an arm rest. Which seat cover do I need?
Answer:
A: Thank you for your inquiry. Our covers are semi customized to fit most vehicles. If your arm rests are not removable, we suggest seat cushions: https://www.fhgroupauto.com/product/premium-car-seat-cushions-full-set/ If they are removable, you can view our options here: https://www.fhgroupauto.com/category/semi-custom-seat-covers/?pa_seat-type=high-back
Question:
Q:Would these seat covers fit on a 2019 Toyota Ran 4?
Answer:
A: Thank you for your inquiry. Our covers are semi customized to fit most vehicles. As long as your head rests are completely detachable, and there are no built-in seat belts in the seats, then these front covers should fit your 2019 Toyota Rav4 seats nicely. Please keep in mind we do not guarantee a perfect fit since they are designed for a universal fit.
Question:
Q:I have a Kicks the driver seat as an arm rest, do any seat covers fit?
Answer:
A: Thank you for your inquiry. Our covers are semi customized to fit most vehicles, as long as the front and rear head rests as well as arm rests are completely detachable, and there are no built-in seat belts in the seats. Please ensure your arm rest is removable before purchasing covers. Otherwise, the only thing that will work are seat cushions, which do not cover the entire seat.
Question:
Q:I have a 2010 Chevrolet colbalt. the seat covers i have areFH PUOO1...will those fit my car.
Answer:
A: Thank you for your inquiry. Our covers are semi customized to fit most vehicles as long as the head rests and arm rests come completely off, and there are no built-in seatbelts in the seats. Please keep in mind we do not guarantee a perfect fit since they are designed for a universal fit. If you purchased the full set (front and rear covers) this will fit a solid back bench.
Question:
Q:how to install backseat bucket seat covers
Answer:
A: Thank you for your inquiry. The installation process for bucket covers that are located in the back is similar to this one. If you are referring to bench seats, please see our rear bench seat covers installation videos.
Question:
Q:The bucket seats covers we bought from you say airbag compatible but there is no apparent slit in the side mesh that one would expect to allow for seat airbags to inflate....does your testing show that the airbags will come through the mesh anyway?
Answer:
A: Thank you for your inquiry. The bucket seats have special stitching that allow it to expand when the air bags are set off. You can view this video here: https://www.youtube.com/watch?time_continue=10&v=eBfZ_9UTbPM
Question:
Q:I have a 2017 Ford F 150 with a split bench (40/60 split) where seat & back (passenger side) goes up/close do you have anything that will fit this vehicle?
Answer:
A: Thank you for your inquiry. Most of our bench covers are designed to accommodate 50/50, 40/60, 60/40, and 40/20/40 split benches with the set of mesh pieces provided in the package. However, if you are referring to a center console at the front, we unfortunately do not have covers for that.
Question:
Q:How are you suppost to use your seat belt if the seat cover goes over it
Answer:
A: Thank you for your inquiry. If you are referring to the 2 front seats, unless you purchased front covers that are compatible with built in seat belts, it will unfortunately not work with your seats. However, if you are talking about the rear covers, you will have to make small cuts where the seat belts go in order to use them. You can view this video as an example: https://www.youtube.com/watch?v=CEDRoVrqpro
Question:
Q:Will these fox skin seat covers fit my Dodge Ram crew cab 2016
Answer:
A: Thank you for your inquiry. We do not have any fox skin seat covers on our website. They are made of synthetic leather, polyester, fabric, or neoprene material. Our covers are semi customized to fit most vehicles. As long as your front and rear head rests and arm rests are completely removable, and there are no built-in seat belts in the seats, then our covers should fit your vehicle’s seats nicely. Please keep in mind we do not guarantee a perfect fit, for they are designed for a universal fit. Most of our products also have dimensions in the pictures that you can use to compare to your seats.
Question:
Q:mine did NOT come with a seperate/ or any head cover.
Answer:
A: Thank you for contacting us. We apologize for this issue. Please contact us at 1-800-928-2426 for further assistance on this matter.
Question:
Q:Do these seat covers fit on a RAV 4 2019 hybrid? I can't get the belt through the crack between the seat and the back -
Answer:
A: Thank you for your interest. The covers should fit, however, please keep in mind that we cannot guarantee a perfect fit, since they are designed for a universal fit. A lot of cars have a hook under the back of the seat that you can unhook to bring the flap that is covering the crevice so that you can get the strap through. If it doesn't work, you can call us at 1-800-928-5518 for further assistance.
Question:
Q:I purchased a set for a 2013 jeep grand Cherokee that has airbags on sides of front seat. It says seat airbag compatible but the stitching looks pretty tight and secure. How does that work???
Answer:
A: Thank you for your interest. The sides are made with a special stitching that allow the covers to expand once the air bag goes off. You can take a look at this video on our airbag deployment test: https://www.youtube.com/watch?v=eBfZ_9UTbPM&feature=emb_title
Question:
Q:Good afternoon. There are two loops on each side of the seat cushion. There are also metal hooks that were provided. How do you suggest tightening the bottom seat cover? Thx
Answer:
A: Thank you for your interest. The hooks that were provided can be used to loop on to the straps that are on the sides of the seat bottom. Then, you can hook them on to any metal bar that is found underneath the seat in order to secure them in place.
Question:
Q:My seat covers have the headrest covers attached to the seat covers do i sepperate them
Answer:
A: Thank you for your interest. Most seats have a button you can push on the sides of the plastic where the head rests go and pull them out. Or, you can try putting a pin inside of the hole on that same plastic part if the button does not work. If you are still unable to detach them from the seats, unfortunately, our covers will not work for your seats. You can contact us at 1-800-928-5518 for further assistance on any returns or refunds.
Question:
Q:I.bouth set covers and I got Miss back set plaease call 613 8903921 May Ad Is 635 Eagle crest on ottawa k2s1g1
Answer:
A: Thank you for your interest. Please call us at 1-800-928-5518 with your order number so that we can further assist you with this matter.
Question:
Q:I am having trouble putting the back seat cover on. I have a liberty jeep 2008. Is there a video to show me how to connect the straps.that is where I am having trouble
Answer:
A: Thank you for contacting us. We have videos on connecting the straps on the bench covers. If you cannot remove the seats, we suggest tucking the material into the crevice as best as possible using a flat item such as a card. https://www.youtube.com/watch?v=-t0EL7vrm9w https://www.youtube.com/watch?v=sFiKN7QgMf8&t=1s
Question:
Q:I assume I have to remove the armrest that is attached to the backrest, cut a hole then attach armrest?
Answer:
A: Yes, correct. The arm rests must be removable in order to install the front covers. After that, you can make a small cut in order to place them back in.
Question:
Q:I have power seat controls on the left side of the driver seat, is there a way to install around these with out covering them up?
Answer:
A: You can tuck the material in between the crevice of the seat and the controls so that it is not covered up.
Question:
Q:I have the your full front and back seat covers for the Kia Sorento and have installed the front seat but the back seat cover are in two pieces and I do not have any idea how its installed
Answer:
A: Thank you for contacting us. You can refer to this video for the back seat installation: https://www.youtube.com/watch?v=ivv1vU2JoOc&t=152s
Question:
Q:Iam having trouble installing my rear seat cover on my 2011chevy malibue, do you have a video on how to install it
Answer:
A: Thank you for your interest. Since our covers are universal, we do not have installation videos for different types of cars at the moment. If you are having trouble removing the seat, there is usually a lever to pull on, or a bolt you can unscrew to get the seats out. If there is no way, the best option is to tuck the material in to the seat's crevices as best as possible.
Question:
Q:what do you do if you have power seats this cover looks like it covers the control.
Answer:
A: Thank you for your interest. If you are unable to tuck the material into the crevices, the best option will be to make small cuts into the material in order to access the controls.
Question:
Q:Will it fit a 2006 Chevy trail blazer
Answer:
A: Thank you for your interest. Our covers are designed for a universal fit. Please make sure your head rests are completely removable prior to installation. You can compare the dimensions in the pictures to your vehicle's seats to ensure a good fit.
Question:
Q:Does this fit a1995 Toyota tercel
Answer:
A: Thank you for your interest. Our covers are for a universal fit. Please make sure that your head rests and arm rests are completely removable, and that there are no built-in seat belts in the seats. If your front seats's head rests are not removable, please take a look at our high back sets: https://www.fhgroupauto.com/category/semi-custom-seat-covers/?pa_seat-type=high-back
Question:
Q:My new seat covers according to the 1 minute installation video do not have buckles for tightening the straps
Answer:
A: Thank you for contacting us. Please call us at 1-800-928-5518, or e-mail us at [email protected] with a picture of what you have received to further assist you with this issue.
Question:
Q:PU001102 style doesn't fit my Toyota 4runner. Can I exchange these 2sets for one front t seat set that would fit.
Answer:
A: Thank you for contacting us. Please note, our covers are universal and therefore, we cannot guarantee a perfect fit. You can give us a call at 1-800-928-5518 with your order number for further assistance.
Question:
Q:Where do the little silver clips go (from the small plastic bag) I've put them on the loops hanging from bottom of seat cover but don't see where to clip them.
Answer:
A: Thank you for your interest. The clips are used to secure the loops on the bottom so that your cover does not move around. You clip them on the bottom of the seats to the straps from the cover.
Question:
Q:What if the bucket seat has an arm rest?
Answer:
A: Thank you for your interest. The arm rest must be removed for installation. Some are able to be pulled out with slight force, will others will have a bolt inside you will need to unscrew. After that, you can make small cuts on the material where the arm rests go to place them back inside.
Question:
Q:not seeing the video on the installation on the dodge ram back seat goodmorning
Answer:
A: Thank you for contacting us. Since the covers are universal, we currently do not have an installation video for that specific vehicle. You can take a look at our videos for the rear bench: https://www.youtube.com/watch?v=Jr-wqGjZR1c https://www.youtube.com/watch?v=sFiKN7QgMf8
Question:
Q:Do you guys need to know make yr and model.thank U.
Answer:
A: Thank you for your inquiry. Our seat covers are universal and not designed for any specific vehicles. The installation process would be mostly the same for everyone. You can use our Shop By Vehicle feature to narrow down some covers, however, because they are universal, the guidelines are not specific and have a low stringency.
Question:
Q:How do you install your rear seat cover on a 2019 Ford Ranger SuperCrew but it has a center armrest that folds down
Answer:
A: Thank you for your inquiry. Our items are universal fits and will be installed the same way on every vehicle. The rear seats that are split bench compatible will have 3 zippers which you can unzip to use the center armrest that folds down. Check out this other video for more help: https://www.youtube.com/watch?v=dE0BHe6xERI&feature=emb_logo
Question:
Q:the video in no way matches the seat cover set my other half purchased for our 2005 rav 4 the package has many pieces in ui, there is no single piece cover like the video shows
Answer:
A: Thank you for your feedback. If you can tell me what item you did purchase, I may be able to direct you to a more useful installation video, or provide more information! Usually, the SKU is on the bottom, right hand side of the packaging, under the barcode.
Question:
Q:I have a 2017 Toyota corolla with rear seats that the head rest do not remove from the rear seats. where can I find seat covers for them.
Answer:
A: Thank you for your inquiry. We do have seat covers designed for non detachable headrests. https://www.fhgroupauto.com/category/semi-custom-seat-covers/?pa_seat-type=high-back
Question:
Q:Is the seat cover installation (shown on fabric covers) the same for pu leather covers?
Answer:
A: Thank you for your inquiry. All of the seat covers do have the same installation process but depending on your car you may have to make a few adjustments. Please note if its a seat cushion we have videos and separate information for those.
Question:
Q:how to install back seat cover in a 2017 toyota rava 4
Answer:
A: Thank you for your inquiry. Since our seat covers are Universal, the installation process is generally the same for every car, however, some vehicles may require additional steps. Did you see our rear seat installation videos? Here are a few we think would be beneficial to you! https://www.youtube.com/watch?v=Jr-wqGjZR1c&feature=emb_logo https://www.youtube.com/watch?v=dE0BHe6xERI&feature=emb_logo https://www.youtube.com/watch?v=CEDRoVrqpro&feature=emb_logo
Question:
Q:How to install front driver seat cover with folding armrest
Answer:
A: Thank you for your inquiry. Our seat covers do require armrests to be removable. Once you install the seat cover you can make a small hole to reinstall the armrest.
Question:
Q:I thought this would be form fitting to the chair. It’s very lose fitting
Answer:
A: Thank you for your comment. These are universal and may fit a little differently on different seat types. We do provide straps and hooks to help tighten the covers. If you need assistance with this, feel free to contact us at 1-800-928-5518
Question:
Q:I purchased your car seat covers for the front seats of our Honda CRV. I put them on and they look pretty good. However, I noticed when I was al done that I have them on so that the side airbag tag is towards the middle of the car and not towards the outside. I didn't see anything in the instructions or in the videos that I watched that indicated that there was a left vs right seat cover. Does it make a difference?
Answer:
A: Thank you for your inquiry. Yes, this does matter. Please switch those seat covers as the tag should be pointing out ward. There should be information included with your order indicating this matter. We truly do apologize and are very happy to hear you reached out to us to address this. Please switch the seat covers before driving your vehicle again.
Question:
Q:How do u install the butterfly docs? Very poor instructions!!
Answer:
A: Thank you for your inquiry. This video is not a good video for that as these do not use butterfly discs. We do have other videos on our installation page for that. It would be helpful to know which covers you have so I can assist you further. We will email you directly for more assistance.
Question:
Q:How do you fit the seatbelts over the cover for the front bucket seats?
Answer:
A: Hello. Thank you for your inquiry. This item is a universal fit designed to fit on many vehicles and seats. It does require all headrests and armrests to be removable. Also, if your seat belts are built into the seat, this will not work with your car.
Question:
Q:I have a 07 dodge ram 1500. The back seats flip up for little storage compartment under the seats. However the backrest dies not fold down, the seat covers I received said it fit my particular model. How would I go about installing the covers for the back seat?
Answer:
A: Thank you for your inquiry. We're sorry to hear you're having a head time with this. The seat covers we have that are split bench compatible have the zippers on the top and bottom of the seat. For more assistnace please call 1-800-928-5518
Question:
Q:Hae so I purchased this from someone but one of the seat covers for the front seats is missing. Is there any way that I can purchase just the one ?
Answer:
A: Thanks for your inquiry. A member of our team has reached out via email to assist in resolving this matter.
Question:
Q:Will this rear seat cover fit a 2018 Mazda 3 hatchback? Thank you!
Answer:
A: Thank you for your inquiry. This item is a universal fit designed to fit on many vehicles and seats. It does require all headrests to be removable. It is split bench compatible and will work with traditional or heated seats. If your car does match these features, then it should fit fine. Please keep in mind that we cannot guarantee a perfect fit as these are universally designed.
Question:
Q:Are these a pair or is it just one cover??
Answer:
A: Thank you for your inquiry. The product presented in this video is the front bucket seat covers. You could refer to it as a pair. This includes two front seat covers.
Question:
Q:do you have install instructions for the leatherette collection? the back and seat are separate so the video isn't appropriate . We have had these covers for some time and the bottom cover always comes off. how do you install the white discs?
Answer:
A: Thank you for your inquiry. We do have videos for these items in particular! https://www.youtube.com/watch?v=0D8mi5ikmmI&feature=emb_logo https://www.youtube.com/watch?v=xrIp4ZvP5OQ&feature=emb_logo
Question:
Q:Does this work for an Kia 2014?
Answer:
A: Thank you for your inquiry. This item is a universal fit designed to fit on many vehicles and seats. It does require all headrests and armrests to be removable. Also, if your seat belts are built into the seat, this will not work with your car. This item will work with traditional or heated seats. This item is not airbag compatible. If your car does match these features, then it should fit fine. Please keep in mind that we cannot guarantee a perfect fit as these are universally designed.
Question:
Q:can I get extra metal hooks for seat cover straps?
Answer:
A: Thank you for your inquiry. Yes! We can assist you with this. Please check your email as a representative will reach out to you shortly.
Question:
Q:My set cover doesn't fit the back set it's for a beach not a bucket
Answer:
A: Thank you for your inquiry. A representative will contact you directly for this matter.
Question:
Q:these have to be the worst directions. Tuck straps where? pull what through the buckle. you wouldn't have so many questions if you made a better video.
Answer:
A: Thank you for your comment. Have you seen our other videos? This is a quick, condesnsed version of the video. We have many more on our installation page. www.fhgroupauto.com/installation/
Question:
Q:Why is there no instructions for the back seat of a bmw x1?
Answer:
A: Thank you for your inquiry. Please be advised our seat covers are not custom designed, therefore, the general instructions of installing the seat covers are the same. We do understand that some vehicles have different features and may require additional steps. For specific questions, please contact our Customer Service Specialists at 1-800-928-5518
Question:
Q:I have 2020 Honda Pilot, and purchased "FH Group Light & Breezy Cloth Seat Cover Set Airbag & Split Ready, Gray/Black- Fit Most Car, Truck, SUV, or Van". when i try to install the front driver and passenger side cover, there are arms on the seat. there is no solution with your video. please let me know how to resolve it. -- thanks.
Answer:
A: Thank you for your inquiry. All our seat covers do require removable armrests to install properly. You will need to remove the armrests to install and then reinstall the armrests when finished.
Question:
Q:Is it made to fit the seat belts??
Answer:
A: Thank you for your inquiry. Our seat covers are universally designed to fit a wide variety of vehicles. Due to this, we cannot have designated spots for seat belts as they are in different places on each vehicle. You can see how to work with seat belts here: https://www.youtube.com/watch?v=VCJyDEbAPVk&feature=emb_logo
Question:
Q:I don't think they will fit properly. Our truck is a 2010, and we have electrical sliding seat lever for up/down and forward backward, on the Driver's seat. How can we solve this ???
Answer:
A: Thank you for your inquiry. Our seat covers are universal and are not custom designed for specific vehicles. Due to this, we cannot pre-cut holes. If the covers do block these, you could cut slits to expose them. Or you can access them through the covers.
Question:
Q:The installation is not as easy as u make it seem to be. How do u get the front straps tighten. What do u do to the side straps. I am so frustrated with this product and no one to call I just might send it back. I am so upset I spent 30 mins just trying to put one on. Please respond to me. I just might send these back
Answer:
A: Thank you for your inquiry. We're sorry to hear you're having trouble installing your seat covers. We are available to discuss the installation with you. Please call us at 1-800-928-5518. A representative will also reach out to you.
Question:
Q:I have a 2011 Toyota Corolla. I am unable to grab the straps from the front to the back to go under the seat. Any suggestions?
Answer:
A: Thank you for your inquiry. If the back of your seat is blocked. sometimes this piece can be a flap that can be lifted to pull the straps through. If you can reach under the seat to see if you can unhook the strap, you can try that. If not, the best option is to tuck the cover into the crevices of the seats and use the hooks to secure it.
Question:
Q:I have Honda Civic 2020, is front seat cover fit my car?
Answer:
A: Thank you for your inquiry. Our seat covers are universal and not custom designed to fit specific vehicles. For the item featured in this video, the item will only work with removable headrests. Also, if there are any armrests, these will need to be removable. The item is Airbag compatible and will work with heated or traditional seats. If you need the full set, you can find that here: https://www.fhgroupauto.com/product/cosmopolitan-seat-covers-full-set/ In the full set, the rear seats are split bench compatible and will come with one set of mesh pieces to accommodate the splits.

Ask a Question

X