Installation

Enter your item's SKU number to find its installation video

Seat Cover Installation

Quick Installation of Flat Cloth Seat Covers Rear Bench

Shop Related Items

Download PDF

Customer questions

Question:
Q:So if the seatbelts come up thru the middle seat, do you cut holes for them?
Answer:
A:Thank you for your inquiry. Yes, if the seat belts are in the seat and you cannot pull them out through the middle, you would have to cut a hole to allow them to come through.
Question:
Q:I have a 2012 Camery with split rear bench. It also has an armrest in the middle. How to I install FH GROUP PU006115 Varsity Spirit PU Leather Seat Covers and allow the arm rest to come down? I watched the split rear video but that was not addresses; the cover made the armrest unusable.
Answer:
A: Thank you for your inquiry. In order to use the middle armrest, you would have to unzip the middle section to let it through. While it is out, it will not be covered by the seat covers.
Question:
Q:I am installing on a 2005 Nissan Altima a d all has been going well but we have non removable headrests and am a little confused by the directions cut a line from the edge of the backrest cover and have not been able to find a video. A y further explanation of this would be greatly appreciated thank you
Answer:
A: Thank you for your inquiry. Almost all our seat covers are designed for removable headrests. The rear seats must have these. That is why, in the video, you see them making slits to reattach the headrests. There are only two items we carry that will work with non-removable rear headrests. PU205013 & FB201115
Question:
Q:What are all the straps for?
Answer:
A: Thank you for your inquiry. The straps are to secure the seat cover in the back. You can move the split seats forward and use the straps and hooks to connect them or you can leave them unconnected.
Question:
Q:I have a 2011 Honda CR-V ex-l .how can I remove the rear seat to install the seat cover.
Answer:
A: Thank you for your inquiry. You might be able to pop it out with force, or squeeze a button that should be under. Otherwise, you will have to loosen some bolts. If there is no way to remove the back bench, the best thing to do is tuck the covers in as bests as possible by using a flat item to squeeze them into the crevices of your seats.
Question:
Q:This video shows a solid bench seat but says it is the instruction for a 60/40 split, having a heck of a time figuring out how to install this.
Answer:
A: Thank you for your inquiry. This video shows a split bench being installed, as it has zippers in the middle that you can use to split your back seat, while the solid bench covers do not. If you need help with using the mesh pieces to split your back seat, you can view this video :https://www.youtube.com/watch?v=dE0BHe6xERI
Question:
Q:have 06 jeep liberty. back seat bottom does not come out. how does the rear cover go on. cant get straps fished thru
Answer:
A: Thank you for your interest. Since our covers are for a universal fit, we cannot guarantee a perfect fit for every vehicle. If your back seat is not removable, we recommend tucking the fabric into the crevices as best as possible by using a flat item such as a card.
Question:
Q:I don’t see how to lif back bottom seat. I have 2014 grand Jeep Cherokee
Answer:
A: Thank you for your interest. Some cars have a button/lever on the bottom that you can press/pull to remove it, or you might be able to by pulling with some force. If you still cannot find a way to lift the seat up, the best way to install these covers are by tucking the material into the crevices as best as possible.
Question:
Q:I just bought your split bench seat set and both top and bottom have zippers. I understand why the top has the zippers (for split bench) but why would the bottom part have zippers? Was I sent 2 tops?
Answer:
A: Thank you for your interest. Both back rest and bottom will have zippers due to many cars having a split bench on the seat bottom as well. You can take a look at the tags on the bottom of the covers for BACKREST and BENCH BOTTOM to know which part goes where.
Question:
Q:I have 2 head rest that come off but my middle one is fake what do i do my car is a 2015 sanata
Answer:
A: Thank you for your interest. Unfortunately, all of the head rests must be completely removable in order to install the covers. For further assistance, you can call us at 1-800-928-5518
Question:
Q:With a split bench are you supposed to have 2 sets of the mesh zippers? If not where are they used? I have watched the video and it looks like they are used on the seat and the back. Thanks for the help.
Answer:
A: Thank you for your interest. Our sets usually come with 1 set of mesh pieces (2) to split the bench seat. One can be used for the back rest, and the other one for the bench. If you need an additional set, you can call us at 1-800-928-5518 and request another set.
Question:
Q:How does the seat cover work if there is a cup holder in the small section of the 60 split?
Answer:
A: Thank you for your interest. The covers have zippers in the middle that you can use to access the cup holder. When in use, simply unzip the middles ones, and zip them back up when you are done.
Question:
Q:I have a 2020 Silverado and the is no way to attach the cover to the back of the split bench seat in the back. You can not pull the seat forward and you can not get anything to slide between the seat and the back steel wall. Is there a video anywhere that shows your customers how to overcome this challenge? The bottom can go on fin, but the back of the seat not so much.
Answer:
A: Thank you for your inquiry. We do understand this could be a bit of a challenge. You can try installing it by the split. If you'd like, check out the video for installing a solid bench seat cover. Although it is different, the steps may be helpful. Are there any crevices on the sides that you can push the covers into? We usually suggest using something flat and thin to do this. https://www.youtube.com/watch?time_continue=193&v=JkuuVEYXd24&feature=emb_logo
Question:
Q:Are you shure working for Chevy Traverse. Don fit for my Chevy Traverse
Answer:
A: Thank you for your inquiry. Our seat covers are universal and are not custom designed to fit a wide variety of vehicles. If your covers are not fitting as you'd hoped, please contact us at [email protected]
Question:
Q:Got a 2007 subaru forester how do yo remove rear seat & run straps through carpet on back rest of rear seat
Answer:
A: Thank you for your inquiry. This is one way to do it, however, you do not need to remove the seats in order to install these. You can use the split bench function to move the seats forward to connect the straps in back!

Ask a Question

X