Premium 3D Air Mesh Seat Covers – Full Set
$68.99
Sign up for our newsletter and get 15% off
-
Description
-
Frequently Bought Together
Ratings & Reviews
Ask a Question
Picture From Customer
22 reviews
FAQ:
-
Are the seat covers made to fit my vehicle?
We offer a variety of semi-customized seat covers to fit most makes and models. Rather than by specific makes and models, our seat covers will fit your car based on specific features, such as side airbags and rear-split benches. Please keep in mind, we cannot guarantee a custom fit.
-
My rear seat is a split bench. Are your seat covers compatible with this?
While we do offer split-bench compatible seat covers, not all of our products have this feature. All of our split-bench compatible seat covers are designed to work with 40/60, 50/50, and 40/20/40 split divisions and also work with fold-down cup holders, armrests, and consoles.
Fantastic product, Easy install Makes an immediate impact on looks This is the second set I have bought The first set finally wore out I bought another type thinking they were all the same They aren??t! I quickly returned those and bought this set again Well worth the money and they look classy.
(0) (0) Watch
I??ve owned a taxicab for over 10 years. I??ve used a number of rear seat covers. All only lasted a few months. Vinyl splits, failing straps, etc. 2 years ago I put this seat cover in the back seat of my ??17 Ford Edge taxicab. They went in easy. They have simple and sturdy straps. My customers love them. They perform great! The first pic is of the right half. About 6 mos. ago It got a cigarette hole in it and caused the excessive wear. ( did not wear through ) Pic 2 is the left side hardly any issues after 2 years. If not for the burn hole I am confident I could have gotten another year out of them. Pic 3 is the New Set I just got. I have 20-30 people get in and out of the cab daily. These seat covers hold up! They clean up easily, too!
(0) (0) Watch
Better than expected, I keep my firefighter gear in my truck and am afraid one day I will trash my seats. Now I have something to keep my original seats protected. I had to reach out to their customer service for something minor. They were very responsive and great to work with. I would get them again, and again.
(0) (0) Watch
2nd time I’ve bought these covers, both times very pleased. Good fit, extra padding makes the seat more comfortable. Make sure you fasten the straps under the seat so the seat bottom stays tight and in place.
(0) (0) Watch
The fit is perfect, esp. on the seat bottom. Very tight, no wrinkling or moving about. And I find they have made the seats more comfortable. The color matches my Jeep well. Considering the price, these are an exceptional deal.
(0) (0) Watch
The car seats look great once you were able to put them on! Very clean colors and the quality is good. I ordered these for my car years ago (another color), and they still held up fine. Glad to gift this to someone else to give that interior a cool look.
(0) (0) Watch
This was the second set I bought for 2 different vehicles fit really good very satisfied with the product
(0) (0) Watch
Love it
I do love the way this set looks and feels compared to the light and breezy sets I had. The only thing I really dislike, is that there is hook and loop on the front seats. Personally, I would rather poke/cut the holes like in the back so it’s easier to push the button to lift and lower the headrest. Plus it would look neater and less bulky. I will try to update after some wear and tear since I have two small furbabies. They weren’t that difficult to put on but again, I’ve had 2 other sets I have put on.
(0) (0) Watch
The actual color is a neon orange. The pic on the website and on the advertising card does not accurratly represent the actual color. Fedex also took 4 days longer to deliver than it should.
(0) (0) Watch
The covers themselves are nice, fit reasonably well. As noted with other reviews, the back seats are very difficult to put on and in the end, I just have them tied at the back and tucked in at the center because my Rav4 has flaps covering all the joints so you can’t feed the straps through.
The headrests are a very big disappointment, they don’t even come close to fitting and do not look like the picture. They are all just balloon shaped and would even be too big for my husband’s Dodge truck. Not sure why you would need to say what vehicle you have if they are made that generic. Too bad because the head rests are very visible.
Would have been nice to have some instructions, there is a pc that came with it that’s a complete mystery to where it would go, it’s small has a zipper down the middle and lots of straps.
I contacted the company to see if they could make, or maybe sell some matching material for a center console cover. Response was rather short and not super friendly. Many of the other seat cover manufacturers offer this so it isn’t an odd request to want one.
Hopefully I have my new car adequately protected from dog paw prints etc, they love car rides, according to them, it’s the BEST!
(0) (0) Watch
Seat Covers
Seat covers were a little difficult putting on but are overall very comfortable and look amazing.
(0) (0) Watch
The Seats Look Much Cooler Now :)
I honestly didn’t expect these seats to be too good. But the buy was worth it and I am very satisfied with the product. You might have a hard time figuring out how to cover the back seats and maybe strapping the seats underneath. But with creative thinking and trial and error, it is possible! Plus, this organization has its own website to help you out and installation as well. Also what us neat is that it came in a carrying bag with the product inside and to put in your old car seat in it too if you want. You also get two black pieces that are extra depending if you need an extension to the back or not. Also, don’t worry too much of the cup holder in the back. You can unzip the middle and viola! Also, the headrests on the back needs to come out to install the backseats. And after install, you need to cut out tiny holes to put back the headrests in the back. Been two months and it still looks good!
(0) (0) Watch
A. Leavitt
I have only just installed the seat covers in my 2008 Kia Sorento. It has the 60/40 split back. They were not too hard to install for my husband and me. We did have one of the zippers split on us. Hubby was able to repair the zipper (handy man that he is). They fit well. We did watch the installation videos before trying to put them on. The one thing we did differently was that we did not cut the X for the head rests to be put through. We took a sharp pair of scissors and punched a small hole big enough to push the bars through. You do need to lift the covers a bit to allow the bars to not push the material down into the hole. I didn’t do the x because I was concerned that that could lead to ripping. I also did not bother to tie the straps under the head rests as I do not lift them up.
(0) (0) Watch
These seat covers look great in my 15 Fusion
These seat covers look great in my 15 Fusion. The only issue is that the back seat covers look a little stretched and weird because I don’t have a middle headrest. It’s more of a hump. So the backseat covers don’t fit snugly back there. It was quite a process putting them on. Took me and my husbands a few hours. But overall I’m pretty happy with them!!
(0) (0) Watch
Blue
NUYU –
Great for the price, They seem to be of good quality but won¡¯t know for a.
(0) (0) Watch Unwatch