Ultra Comfort Leatherette Seat Cushions – Front
$218.99 | $156.39
Sign up for our newsletter and get 15% off
FAQ
-
Are the seat covers made to fit my vehicle?
We offer a variety of semi-customized seat covers to fit most makes and models. Rather than by specific makes and models, our seat covers will fit your car based on specific features, such as side airbags and rear-split benches. Please keep in mind, we cannot guarantee a custom fit.
-
My rear seat is a split bench. Are your seat covers compatible with this?
While we do offer split-bench compatible seat covers, not all of our products have this feature. All of our split-bench compatible seat covers are designed to work with 40/60, 50/50, and 40/20/40 split divisions and also work with fold-down cup holders, armrests, and consoles.
Ratings & Reviews
Ask a Question
Picture From Customer
46 reviews reviews
Acura MDX
They look very nice. The grey goes nicely with the tan leather interior. Gives a very nice update to my 2007 Acura MDX.
An Acura MDX doesn’t have an open split between the back and the seat which made these difficult to install. You could feel where the disk had to go but getting it positioned where it would catch and not slip out is tricky but can be done!
It did get easier after the first disc and figuring out which tools worked the best.
Instructions ***** CLOSED SEAT BACK***
Take the headrest off first, then pull the back seat cover into position. This takes a bit of work and it’s easier if the cover is warm. The cover doesn’t fit the seat precisely but it’s ok. I think it will mold better to the seat once it gets hot inside the car.
Now just set the bottom cover on the seat. Hook the disc into the elastic loops. Its paramount they’re attached correctly!
Now the tricky part. The object is to get the butterfly edges of the disc to slip behind the back of the seat and move it to a vertical position. The top of the disc catching seat back and the bottom of the disc catching on the seat cushion.
I used two smaller,open ended wrenches. I positioned those on either side of the elastic with the C part hooked into the disc so I could “push” the disc deep into the split in the seat. This is where it gets tricky. I pushed so the bottom flange went deep down behind the seat cushion….far enough to where the top flange can clear the cushion edge of the back of the seat. I had to used a wide flat screwdriver to push the upper flange into a vertical position.
That’s it, that’s the hardest part. It takes a lot of feeling around so you know the disc is secured vertically and not going to slip out. I found it helpful to lay the seat back a bit initially and the set it up when I was pushing the upper flange into position.
The rest is a piece of cake and you can follow the regular instructions.
Reminder….the instructions I’ve shared are specific to a car seat with a closed back, where theres no split opening behind the seat.

-
I recently bought the ultra comfort seat covers in beige / tan color for both front and back seats. The front seats covers are great and fit beautifully. The back covers are just ok. One of the zippers in the back seat cover is defective and will not hold and comes apart. It is defective. I will be contacting the customer service to see how they can help. These seats look nice but are not cheap. Front seats covers 5 stars, back seat covers 3 stars.
The covers were a little too light in color…not an exact match. I need a bit more of a sand color. Not too many colors in sand available. The cream has a bit more yellow tones in it. Still looks good. Easy to install. I’ve only had them for a few weeks. I hope they wear well! They look very chic in my Cadillac!
My 2015 Honda Accord Sport has black interior so the solid black seat covers could be mistaken for original equipment, I am pleased with the fit (snug) and the look and feel of the material. The youtube installation guide was helpful, if you have normal strength in your hands you will have no problem. So far they have stayed in place entering & exiting the car. I probably drive less than most people so I expect they will wear well, time will tell.
Awesome company to order from
These seat cushions fit like a glove. They look, feel, and smell like real leather. They should last many years and do a great job of protecting my truck seats. And this is the company to order from. There was a misunderstanding with my order and FH Group made it right. They went above and beyond to make me happy. They treated me like I was their only customer. I was very impressed. So if you’re looking for seat covers or floor mats, look no more, you’ve come to the right place.
Great Product
I bought a pair of these front seat covers in black and white at their location in Secaucus since I live in NJ.
The fit is amazing and the assistant, June, who helped me was very knowledgeable and professional.
These covers fit my mini clubman like a glove, and I am considering ordering another pair.
Very impressed with this product.
Better than my Original Acura Rl leather seat covers
I ordered these because my original seat covers which are leather were in need of repair.I found a seller on amazon and hoped for the best. They arrived and i was amazed by the quality and feel of the seat cushions. The installation was rather easy and these covered all of the imperfections of my factory leather seat covers. I drive an 05 acura rl. The feel of these seat cushions is amazing. They didnt get hot like the leather usually does, but look and feel like leather. My interior looks awesome now. Time to order the rears.
Excellent!!
The material is high quality. This seat cover fits like a glove on my 2017 volkswagen GTI. It is elso extremely easy to install – -around 15 minutes or less, It is very comfortable and easy to clean, I coild not find any flaw on this seat cover. And oh, it looks good , too!
Bought on a friend's recommendation.
Bought on a friend’s recommendation. I waited a few weeks to review because I don’t want to lie to another customer and have them end up with a disappointing product. But after using this seat cover for a while I actually do recommend it. This is my first time purchasing a seat cover so I don’t have anything to compare it to but the quality and color are good. It doesn’t shift around on my seats when I get in and out of the car either.
Jordyn Wida
These seat covers are way better than I was expecting. I didn’t want anything that would slip off or look cheesy so these are perfect. The front seat covers fit my tC like a glove, the back covers are a bit big but that was expected since I have a coupe. I made it work though and it looks fine. The black and white pattern gives everything a clean look and feel and I’ve gotten TONS of compliments already. They add an element of maximum comfort too – very soft/smooth and cushiony. These seat covers make me want to sleep in my car instead of my bed. I don’t expect them to wear down quickly, but once it’s time for new ones, I will most definitely be coming back for more of these.
Gorgeous!
I just bought these and they are gorgeous! The fit my 2012 Mustang seats and are nice and snug. The quality is far better than I expected. They are very soft and cushioned and look like they belong in the car. I got the black and white ones and keep getting compliments. Very easy to put on. The only comment I would say to be careful is the metal brass plate that is on the back. It’s very attractive and I like it but I have a convertible and it can get really hot so be careful if it’s in direct sunlight for too long. It cools off quickly but can be REALLY hot. If you’re not in a convertible it shouldn’t be a big problem. All in all, I am extremely happy with the purchase and hope that I can find the matching back seat version. I HIGHLY recommend this product!
Anonymous (verified purchase) –
I had wear showing on my factory seats. Everyone who looks at these seats is amazed by the look and the quality. A friend of mine also has a set for his RV Couldn’t be happier. I found it best to remove the seats and install the covers. Make it easier to make a good connection on the lower seat
(0) (0) Watch Unwatch Edit