Installation

installation page

Seat Cover Installation

1 Minute Car Front Bucket Seat Covers Installation

1 Minute Car Front Bucket Seat Covers Installation

Within one minute,you will grasp most of the tricks about installing your bucket seat covers.
Download PDF
Customer questions

Question:
Q:How do you install a full back seat cover with a arm rest
Answer:
A:Thank you for your inquiry. If the arm rest goes up and down, the seat cover should be able to fit around it the armrest while installing. If the armrest is on the side, it should be able to go up and down, but will not be covered. If the armrest is in the middle, you do need a split bench seat cover and may have to unzip the cover to let it out. Again, it will not be covered.
Question:
Q:What do I do with the metal clips? This is not covered in the video!
Answer:
A: Thank you for your inquiry. The metal clips are to secure the seat cover better. You would use the straps on the side. Hook the clip to the strap and then under the seat, hook it all the way to the other side. Repeat this for the opposite side of the seat.
Question:
Q:Head rest does not come off on back seat
Answer:
A: Thank you for your inquiry. Mostly all our seat covers do require removable headrests for the rear seats for proper installation. If yours do not remove, please see items PU205115 & FB201115.
Question:
Q:What are the metal clips for..purchased flat cloth bucket seat covers...thanks
Answer:
A: Thank you for your inquiry. The metal clips are to help secure your seat covers. You would use them to attach the straps under the seat from one side to the other.
Question:
Q:I have built in seatbelts at each corner how do I install?
Answer:
A: Thank you for your inquiry. If you have built-in seat belts you would have to purchase seat covers that will accommodate. Please see this installation video and link to one of our built-in seat covers. https://www.youtube.com/watch?v=R9Qpki_nC5A https://www.fhgroupauto.com/product/all-purpose-built-in-seat-belt-pu-leather-seat-covers/
Question:
Q:Installing in 1998 Mazda protege having problems with back seat
Answer:
A: Thank you for your inquiry. Please contact our customer service team at 201-210-2426 or info@fhgroupauto.com for more help.
Question:
Q:What are these little s hooks for? On the car seat covers
Answer:
A: Thank you for your inquiry. The hooks are for additional security when installing your seat covers. The straps on the sides of your seat covers (depending on which ones you have) can be attached to the hooks which can be hooked onto the bottom of your seat.
Question:
Q:2017 Ford Transit Van. FB060102GRAY seat cover. There is a moveable armrest on the inside side of the seat. How do I install the seat cover, and still use the armrest? Can I cut a hole in the fabric at the pivot point of the arm rest, and push the armrest through the hole, then install the cover over the back of the seat?
Answer:
A: Thank you for your inquiry. It is best that you have removable armrests to install your seat covers properly. Should you feel you can make this work by cutting a small slit for your armrests, they are yours to with as you please, however, please be aware that once they are cut, we cannot accept the return.
Question:
Q:Can these covers be put in the washing machine?
Answer:
A: Thank you for your inquiry. The specific seat covers in this video can be put into the wash on a gentle cycle and air dried. There are some items you cannot wash. If you\'d like to be sure, please contact us at info@fhgroupauto.com or 201-210-2426 so we can give you more information about the seat covers you may have.
Question:
Q:Do you have a video for a 2014 ford fusion for the front seats
Answer:
A: Thank you for your inquiry. Our seat covers are universal fits designed to fit many different vehicles. We do not have videos for specific cars as the installation process is generally the same. Some cars may have different features that will require extra steps, however, we do not have currently have videos showcasing every feature. Please feel free to contact our Customer Support team for further assistance 1-800-928-5518
Question:
Q:My front seats do not have a opening in the back between the bottom and backrest so I am unable to put the strap thru and secure underneath. What do I do?
Answer:
A: Thank you for your inquiry. Our seat covers are semi custom fit and are not designed to custom fit any vehicle. If you do not have an opening in the crevice of your seat, you can tuck the seat covers in on the sides and if there is anything the straps can be secured to you can use those to hold the cover in place.

1 Minute Car Rear Bench Seat Covers Installation

1 Minute Car Rear Bench Seat Covers Installation

Within one minute,you will grasp most of the tricks about installing your Bench seat covers.
Download PDF
Customer questions

Question:
Q:What are the pins for that are included
Answer:
A:Thank you for your inquiry. The metal clips are to secure the seat covers better. You would use the straps that go behind the seat and use the hook in the middle to attach the straps to. Please see the link to the video below for more help. https://www.youtube.com/watch?v=sFiKN7QgMf8
Question:
Q:Camry Hybrid 2014 does not have removable headrests. They are connected to the seat back. How can this seat cover we bought cover that configuration? The front seat covers worked fine but we are having trouble with the back...
Answer:
A: Thank you for your inquiry. Unfortunately most of our seat covers do require removable headrests for the rear seats with the exception of two. If you would like more help with this, please email me at jennifer@fhgroupauto.com
Question:
Q:what are the extra bags for
Answer:
A: Thank you for your inquiry. If you are referring to the bags with hooks in them, those are to further secure the seat covers under the seat.
Question:
Q:LOVE the blue color. Matches my paint perfecto. BUT back seat is a bench seat & car is 2 door. 1969 CAMARO. Do I try to pull the bench seat out? Seat does not move back & forth or anywhere else.
Answer:
A: Thank you for your inquiry. You do not necessarily need to take the seat out. If your seats are not split bench compatible it can be a little difficult to install but you would have to tuck the whole seat cover in around the sides.
Question:
Q:i ordered trendy elegance bucket seat covers for my 2014 lincoln mkz bar code 816352021064 fb060102beigh i cannot pull the straps thru the back seat tried many times but will not go thru any ideas why they dont supposed to fit my car? my back front seat does adjust.
Answer:
A: Thank you for your inquiry. Every car does have different features that may cause a few extra steps to go through the installation process. If the back of your seat has a flap or something to that extent, it can cause interference with this. For further assistance, please contact our Customer Support team 1-800-928-5518
Question:
Q:I purchased seat covers for my 2017 nissan sentra. my question is about the rear seat backrest cover. My rear seat head rest is not removable.. The installation instructions indicate that i can cut a line in the backseat cover to install the rear seat head covers. My question is, where should i cut the rear seat cover so that i am able to install the back head rest.
Answer:
A: Thank you for your inquiry. Our instructions indicate making a small incision to reinsert the headrests. Mostly all of our seat covers are made to fit the rear seats with removable headrests only. Please call 1-800-928-5518 for more assistance.
Question:
Q:Is there a way to order the separator zipper on its own? Because I need one more :(
Answer:
A: Thank you for your inquiry. We are able to get you another set of mesh pieces. We will email you for more information.
Question:
Q:what are the zippers for?????
Answer:
A: Thank you for your inquiry. The zippers on the seat covers are for split benches. This way, if you need to pull your seat down, you just have to unzip the seat cover. Each rear bench comes with a set of mesh pieces that will allow you to cover the side of the seat so that you will not have to unzip the cover each time. Take a look at this video for more information: https://www.youtube.com/watch?v=dE0BHe6xERI

Split your car bench seat covers with mesh cloth

Split your car bench seat covers with mesh cloth

A lot of folks have questions/concerns about how to apply the mesh cloth provided by us to cover the exposed sides of the bench while installing split bench seat covers.Take a close look at this video and you will get the idea in a heartbeat.
Download PDF
Customer questions

Question:
Q:How install back with cup holder
Answer:
A:Thank you for your inquiry. The rear seat cover will be installed the same way. If your cup holder folds up, it might be easier to do that during installation. Once it is on, you can unzip the middle and pull the cup holder down. The seat covers will not cover the cup holders but most will allow the holder to be used.
Question:
Q:I have a 2013 Dodge Dart SXT and the back seats are separated into 1/3 on one side and 2/3 on the other side. The product I received does not have the proper sizes for the back seats. They look like they go with an auto and has 1/2 separated seats. How do I get the proper back seat covers for my car?
Answer:
A: Thank you for your inquiry. We\'re sorry to hear you\'re having trouble with your seat cover. Our rear bench seat covers are universal fits so they are compatible with 40/60, 60/40, 50/50, and 40/20/40 splits. There are more zippers for this that can allow more options for splits. if you\'d like to contact us at info@fhgroupauto.com we can provide more details with more information.
Question:
Q:HOW CAN I ORDER MORE MESH FOR MY SEAT COVERS?
Answer:
A: Thank you for your inquiry. If you need one additional set we can send it as a courtesy. If you require more, it\'s $5 per set. I will send you an email to assist you further on this matter.
Question:
Q:2019 Subaru Outback: how install rear seat cover WITHOUT removing 1 piece rear seat bottom? Does not appear to lift/remove, so how front to rear installation straps that cinch through plastic buckles (like front covers) can reach buckles if can not get under single rear seat bottom cushion?
Answer:
A: Thank you for your inquiry. The tucking method does work if you are unable to lift your rear bench seats. Please see this video: https://www.youtube.com/watch?v=Jr-wqGjZR1c
Question:
Q:I have the faux leather for split bench how do I put that on do I still have to slit for the seatbelts?
Answer:
A: Thank you for your inquiry. Yes, if you need to pull the seat belts through the bottom, that would be the best option.
Question:
Q: Roll over image to zoom in I have purchased the car seat covers below, my set did not come with mesh cloth to enable my rear bench to be split. Could the mesh be sent? FH-PU002-1114 Classic Exquisite Leather Car Seat Covers, Airbag compatible and Split Bench, Solid Beige color
Answer:
A: Thank you for your inquiry. We are sorry that your seat covers were missing the mesh cloth pieces. We can certainly send those to you. We will email you for more information.

Rear Bench Seat Belt Adjustment

Rear Bench Seat Belt Adjustment

In this one minute video,we will show you how to keep your seat belt holder and buckles accessible while installing bench seat covers.
Customer questions

Question:
Q:My backseat headrests don’t come off they just fold, how do I install the backseat cover now?
Answer:
A:Thank you for your inquiry. Almost all our seat covers are designed for removable headrests. The rear seats must have these. That is why, in the video, you see them making slits to reattach the headrests. There are only two items we carry that will work with non-removable rear headrests. PU205013 & FB201115

Built-in Seat Belt Compatible Seat Covers

Built-in Seat Belt Compatible Seat Covers

The secret lies in a specially engineered zipper on the side,which lets you zip up to fit snugly around the holster no matter where it's positioned on the seat. And the no-slip design means the zipper won't budge,so once you zip it up,it stays where you want it.We offer our built-in seat belt compatible seat covers in a variety of colors,designs,and materials to match any interior and we're always working to expand our catalog and offer you more options.
Customer questions

Question:
Q:how do you get the cover over the bottom of the seat belt
Answer:
A:Thank you for your inquiry. You may have to adjust the seat belt and work around it as you install. The seat covers should be able to go around the seat belt to install.
Question:
Q:do they fit a chrysler sebring touring convertible?
Answer:
A: Thank you for your inquiry. This item is a universal fit but is made for cars with seat belts built into the seat. This item also requires removable headrests. If your car matches these features, than it should fit well.

FH Group Premium Neoprene Car Seat Cover

FH Group Premium Neoprene Car Seat Cover

Neoprene cover is waterproof and sturdy, it offers long lasting protection. Also engineered to accommodate traditional and heated seats
Customer questions

Question:
Q:Will this set fir my Hyubdai elantra 2011 gls 4 doors manual shift
Answer:
A:Thank you for your inquiry. This video shows multiple items. Please note that these items are universal fits designed to fit on many vehicles and seats. They do require all headrests and armrests to be removable. Also, if your seat belts are built into the seat, these will not work with your car. These items are split bench compatible, Airbag compatible, and will work with traditional or heated seats.

Full Coverage Flat Cloth Bench Seat Covers

Full Coverage Flat Cloth Bench Seat Covers

We're proud to introduce our newly designed bench seat cover that covers both the front and the back of the bench-the first of its kind on the market!No more unsightly straps,buckles,or hooks leaving the back of your bench exposed.This cover works especially well on SUVs and vans with three rows of seats,but also provides an upgrade for anyone who utilizes their split function to fold down their back seat as well.
Customer questions

Question:
Q:Will this fit a 1988 Chevy Pickup without headrests?
Answer:
A:Thank you for your inquiry. This seat cover is a Universal fit made to fit most vehicles. It will fit a car with no headrests and should fit your vehicle fine.
Question:
Q:Why do these not fit on my Nissan quest van?
Answer:
A: Thank you for your inquiry. In what way are these seat covers not fitting?
Question:
Q:Would this fit a back seat with a 60/40 or 40/60 split and with a middle fold down cup holder? Thank you.
Answer:
A: Thank you for your inquiry. This item is split bench compatible and will fit both these splits. It will allow the cup holder to fold down, however, when it is folded down, it will not be covered.

Bucket Seat Cover Fitting Instructions

Bucket Seat Cover Fitting Instructions

In this video,you will learn how to install bucket car seat covers for your vehicle.It will save your time and answer most of your questions.With some patience and proper installation,you will be satisfied with the look of seat covers in your car.
Download PDF
Customer questions

Question:
Q:My car has side-impact airbags.Are your seat covers compatible with this?
Answer:
A:While we do offer airbag-compatible seat covers,not all of our products have this feature.By selecting your year/make/model of your vehicle from the dropdown menu in our header,you can make sure you're looking at seat covers that will work with all the features of your seats.
Question:
Q:I have armrests on my front seats. Will your seat covers still fit?
Answer:
A: Our seat covers are specifically designed to not interfere with armrests. Just remove the armrests when you install the seat covers, and put them back when you're done.It's that easy. For more detailed instructions, check out our installation instructions. Please note that at the moment, armrest covers are not included in our seat cover sets or accessory sets, but you can buy them separately here.
Question:
Q:I HAVE ORDERED YOUR SEAT COVERS FOR MY EXPEDITION EL 2007. I HAVE WATCHED YOUR INSTALLATION VIDEO. I DID NOT SEE WHERE THE SEAT CONTROLS WERE EXPOSED TO BE ABLE TO USE DURING YOUR DEMONSTRATION. BEFORE I UNPACK THEM ARE THEY SO EQUIPED? THE SIDE AIR BAG IS SHOWN ON PACKAGING AND THE REMOVEABLE HEADREST AS WELL.. THANKS FOR YOUR HELP ON THIS.
Answer:
A: Thank you for your inquiry. Our seat covers do not specifically accommodate this feature. The covers are universally made and cannot provide this option as it would not be the same on every vehicle. For customers who do experience the seat covers covering their seat control buttons, they find they are still able to use these features through the seat covers, while others have made slits to reveal these buttons.
Question:
Q:Looking for you tube video on how to install front bucket seat covers for Kia Sorento 2014 other sir bags?
Answer:
A: Thank you for your inquiry. We do not have installation videos for specific vehicles. Our seat covers are universally designed to fit many different vehicles. Our seat covers can be installed the same general way on any car. If you are looking for more information in regards to the Airbags, we can provide more information. Feel free to call us at 1-800-928-5518 for more help.
Question:
Q:I know how to put on the seat covers but I have a 2005 trailblazer with pinhole head rest removal and can not get the head off
Answer:
A: Thank you for your inquiry. Depending on which seat cover you have, removing the headrests is required. If your headrest should be removable but you are having trouble, please try calling the dealership or a mechanic for more assistance.
Question:
Q:what are the white disks for...I really do need instructions for installation of the seat covers for a 2012 Mustang..p/n: PU208102 RED/BLACK
Answer:
A: Thank you for your inquiry. For this item we currently only have an instruction manual. https://www.fhgroupauto.com/seat-cushion-installation/ Please scroll to the bottom for the PDF.

Solid Bench Seat Cover Fitting Instructions

Solid Bench Seat Cover Fitting Instructions

In this video, you will learn how to install bench car seat covers for your vehicle. It will save your time and answer most of your questions. With some patience and proper installation, you will be satisfied with the look of seat covers in your car.
Download PDF
Customer questions

Question:
Q:My rear seat is a split bench. Are your seat covers compatible with this?
Answer:
A:While we do offer split-bench compatible seat covers, not all of our products have this feature. By selecting your year/make/model of your vehicle from the dropdown menu in our header, you can make sure you're looking at seat covers that will work with all the features of your seats.All of our split-bench compatible seat covers are designed to work with 40/60,50/50,and 40/20/40 split divisions and also work with fold-down cup holders,armrests,and consoles.Please our installation video Split Bench Seat Cover Fitting Instructions.
Question:
Q:How do I put on the rear bench cushion if u can’t lift it up and remove it?
Answer:
A: Thank you for your inquiry. You can tuck the sides in using a flat utensil to push it back as far as possible. If you need a more secure fit, you can try contacting a local mechanic or dealership for more help with this matter.
Question:
Q:How do you install rear back bench with fold down cup holder/ arm rest? The package shows the seat covers accommodate this but there is no video or instructions on how to do it?
Answer:
A: Thank you for your inquiry. Have you looked at our other installation videos? Take a look here: https://www.youtube.com/watch?v=dE0BHe6xERI This shows how to use the mesh pieces when installing with split bench. You would have to unzip the split, if it\'s not already, and pull the armrest out. If you have a cover that is a SOLID bench, this will not allow any splits to be used.

Split Bench Seat Cover Fitting Instructions

Split Bench Seat Cover Fitting Instructions

We know that no two cars are exactly alike.That's why we've engineered a split bench seat cover that takes all makes and models into consideration and works to accommodate them all.Functionality is key in our products,so we've created an intelligent three zipper design to work with any kind of split rear bench, whether it's 50/50,60/40,40/60,or even 40/20/40.Watch this video and you will learn more about split rear benches and how FH Group's split bench seat covers can work for yours.
Download PDF
Customer questions

Question:
Q:So if the seatbelts come up thru the middle seat, do you cut holes for them?
Answer:
A:Thank you for your inquiry. Yes, if the seat belts are in the seat and you cannot pull them out through the middle, you would have to cut a hole to allow them to come through.
Question:
Q:I have a 2012 Camery with split rear bench. It also has an armrest in the middle. How to I install FH GROUP PU006115 Varsity Spirit PU Leather Seat Covers and allow the arm rest to come down? I watched the split rear video but that was not addresses; the cover made the armrest unusable.
Answer:
A: Thank you for your inquiry. In order to use the middle armrest, you would have to unzip the middle section to let it through. While it is out, it will not be covered by the seat covers.
Question:
Q:I am installing on a 2005 Nissan Altima a d all has been going well but we have non removable headrests and am a little confused by the directions cut a line from the edge of the backrest cover and have not been able to find a video. A y further explanation of this would be greatly appreciated thank you
Answer:
A: Thank you for your inquiry. Almost all our seat covers are designed for removable headrests. The rear seats must have these. That is why, in the video, you see them making slits to reattach the headrests. There are only two items we carry that will work with non-removable rear headrests. PU205013 & FB201115
Question:
Q:What are all the straps for?
Answer:
A: Thank you for your inquiry. The straps are to secure the seat cover in the back. You can move the split seats forward and use the straps and hooks to connect them or you can leave them unconnected.

Full Set seat cover Fitting Instructions

Full Set seat cover Fitting Instructions

In this video, you will learn how to install car seat covers for your vehicle. It will save your time and answer most of your questions. With some patience and proper installation, you will be satisfied with the look of seat covers in your car.
Download PDF
Customer questions

Question:
Q:I have heated seats. Will your seat covers affect this?
Answer:
A:Our seat covers work on heated seats without a problem so you can look cool and stay cozy.
Question:
Q:Are the seat covers made to fit my vehicle?
Answer:
A: We offer a variety of semi-customized seat covers to fit most makes and models. Rather than by specific makes and models, our seat covers will fit your car based on specific features, such as side airbags and rear-split benches. For a complete run-down on our product features, click here, or feel free to contact one of our experienced representatives to help you pick the best seat covers for your vehicle.
Question:
Q:Are your seat covers difficult to install?
Answer:
A: Our seat covers are fairly easy to install, but the installation may vary from model to model. Most of the front seat covers are simple slip-ons; some rear seats require removing or lifting the seats from the vehicle. We offer installation instructions here. Feel free to contact our knowledgeable customer service representatives for more information.
Question:
Q:My car has a bracket that the seat belt slides through so it is impossible to pull the backrest of the seat cover down
Answer:
A: Thank you for your inquiry. If your seats have built-in seat belts with the top piece on the shoulder of the seat, then this item will not fit your vehicle. A seat cushion might work better for your car.
Question:
Q:Is the back seat arm rest in the middle totally useless with these seat covers on?
Answer:
A: Thank you for your inquiry. This item is split bench compatible which means you can unzip the middle piece to allow the arm rest to come out, however, it will not be covered.
Question:
Q:How do you get the straps from the rear to the front buckles when you have power seats? The motor and wires make it difficult
Answer:
A: Thank you for your inquiry. It is true that different vehicles have different features that can create more effort than another. Have you seen our other videos? They could offer alternate suggestions that will work for you!
Question:
Q: My front seats have back flaps how do I install the seat covers?
Answer:
A: Thank you for your inquiry. Cars with back flaps usually are hooked underneath. You can unhook the flap to install and re-hook it back when you\'re finished.
Question:
Q:I have an 2005 Dodge Dakota quad cab and my back bench the back rest part does not move how do I install the seat covers
Answer:
A: Thank you for your inquiry. If your rear seat does not move you can tuck the sides in using a flat utensil to push the cover back as far as possible. If you need a more secure fit, you can try contacting a local mechanic or dealership to install the covers for you.
Question:
Q:I received my seat cover order and was surprised to see the color beige. The illustration I observed led me to believe the seat covers for my 2016 Prius was black and white, so I assumed that would be the color I would receive, as my interior is black and white. All other products in this category clearly show the color before you order, as I searched a long time to find black and white. Please advise me, if you have the color shown in the order ad, and what I should do at this point
Answer:
A: Thank you for your inquiry. We have sent you an email to discuss this matter further.
Question:
Q: I bought the car cover sheets that are leather I cannot put them on my vehicle I watched your videos and I still am not able to install them I have a 2018 Dodge Journey and I have tried but still can’t put the covers on Please help Mrs. Cardozo
Answer:
A: Thank you for your inquiry. Our seat covers are universal fits and because of this there can be certain cars that have different features which can cause slightly different approaches. I would need more information to further assist you. I will send you an email but you can also call 1-800-928-5518 for more help on this matter.
Question:
Q:2011 Ford Taurus the back seat cover is bench and back. How do you remove the head rest?
Answer:
A: Thank you for your inquiry. If the rear headrests are removable, they should remove the same as the front. Most cars have a button on the side that you can push to pull the headrests out fully.
Question:
Q:I have a 2005 Mercedes Benz C230. I cannot tell how to remove the back bench or the back set backrest. Any help that can be offered? These were the seat covers I was told to purchase for my vehicle by your company.
Answer:
A: Thank you for your inquiry. It is not necessary to remove your seats for installation. Please see this video: https://www.youtube.com/watch?v=Jr-wqGjZR1c
Question:
Q:my seat covers have the headrest attached...where do i find an installation video?
Answer:
A: Thank you for your inquiry. We currently do not have a video for this seat cover however, you are able just to slide the cover over the seat and connect the straps at the bottom the same as other seat covers.