Installation

Enter your item's SKU number to find its installation video

Seat Cover Installation

Split your car bench seat covers with mesh cloth

Shop Featured Item

Download PDF

Customer questions

Question:
Q:How install back with cup holder
Answer:
A:Thank you for your inquiry. The rear seat cover will be installed the same way. If your cup holder folds up, it might be easier to do that during installation. Once it is on, you can unzip the middle and pull the cup holder down. The seat covers will not cover the cup holders but most will allow the holder to be used.
Question:
Q:I have a 2013 Dodge Dart SXT and the back seats are separated into 1/3 on one side and 2/3 on the other side. The product I received does not have the proper sizes for the back seats. They look like they go with an auto and has 1/2 separated seats. How do I get the proper back seat covers for my car?
Answer:
A: Thank you for your inquiry. We're sorry to hear you're having trouble with your seat cover. Our rear bench seat covers are universal fits so they are compatible with 40/60, 60/40, 50/50, and 40/20/40 splits. There are more zippers for this that can allow more options for splits. if you'd like to contact us at [email protected] we can provide more details with more information.
Question:
Q:HOW CAN I ORDER MORE MESH FOR MY SEAT COVERS?
Answer:
A: Thank you for your inquiry. If you need one additional set we can send it as a courtesy. If you require more, it's $5 per set. I will send you an email to assist you further on this matter.
Question:
Q:2019 Subaru Outback: how install rear seat cover WITHOUT removing 1 piece rear seat bottom? Does not appear to lift/remove, so how front to rear installation straps that cinch through plastic buckles (like front covers) can reach buckles if can not get under single rear seat bottom cushion?
Answer:
A: Thank you for your inquiry. The tucking method does work if you are unable to lift your rear bench seats. Please see this video: https://www.youtube.com/watch?v=Jr-wqGjZR1c
Question:
Q:I have the faux leather for split bench how do I put that on do I still have to slit for the seatbelts?
Answer:
A: Thank you for your inquiry. Yes, if you need to pull the seat belts through the bottom, that would be the best option.
Question:
Q: Roll over image to zoom in I have purchased the car seat covers below, my set did not come with mesh cloth to enable my rear bench to be split. Could the mesh be sent? FH-PU002-1114 Classic Exquisite Leather Car Seat Covers, Airbag compatible and Split Bench, Solid Beige color
Answer:
A: Thank you for your inquiry. We are sorry that your seat covers were missing the mesh cloth pieces. We can certainly send those to you. We will email you for more information.
Question:
Q:I have a 2014 ford f250 and when I bought the seat covers it said it was made for my truck so I assumed that it would come with 2 mesh inserts as it splits on the top and the bottom. I need another inset . How can I get another one. Thanks Mario Stork
Answer:
A: Thank you for your inquiry. Our covers usually come with one set of mesh pieces. However, we can provide you with an additional one as courtesy. You may call us at 1-800-928-5518 for further assistance.
Question:
Q:Can I order 1 more mesh cloth for the seat covers?
Answer:
A: Thank you for your inquiry. Please call us at 1-800-928-5518 for further assistance.
Question:
Q:how do you install rear seat covers when there is a cup holder but no zipper on the cover
Answer:
A: Thank you for your inquiry. Unfortunately, if there is not zipper in the back seat, it means that you purchased a solid bench and there is no way to use the cup holder in the back seats. For further assistance on refunds and returns, please contact us at 1-800-928-5518
Question:
Q:On the headrest, do you tie or use metal provided clips to tighten the cover? If so is there a diagram or video to demonstrate it?
Answer:
A: Thank you for contacting us. The clips are meant to be for the seat covers, not the head rests. The headrests can tied for a tighter fit.
Question:
Q:Hi i bought some seat covers for my 2007 toyota sienna but i can't put them because all my seats have heandrest?
Answer:
A: Thank you for your interest. If you purchased the low back seat covers with the separate head rest covers, it means that your seats's head rests must be completely detachable in order to install them. Once you have the seat covers on, you have to make small cuts on the fabric in order to put the head rests back in. If you purchased the high back covers, you can just put them over the headrests without needing to remove them.
Question:
Q:HOW CAN I ORDER MORE MESH FOR MY SEAT COVERS?! Mine only came with only 2 mesh panels for the split backrest but none for the split seat. I'm really excited to finish installing it. I just need those pieces..
Answer:
A: Thank you for your interest. You can contact us at 1-800-928-5518 for further assistance with this matter.
Question:
Q:My daughter received Floral Seat Covers – Full Set as a Christmas gift. The back seat has a split but I need a second set of zipper panels to complete installing them. Thank you.
Answer:
A: Thank you for your interest. You can contact us at 1-800-928-5518 from Monday to Friday from 9am to 5:30pm EST with your order number for further assistance.
Question:
Q:How do I Install my two front seats in my backseat with a cupholder for a Kia forte 2012 I am at a complete loss
Answer:
A: Than you for your interest. If your back seat is a bench seat, do not install your 2 front seats there. If you purchased a split bench cover, you will put it over the cup holder, and then use the middle zippers to access it when in use, and close them back up when you are done.
Question:
Q:I think I got two of the same back seat covers
Answer:
A: Thank you for your interest. Please ensure both tags on the cover both say back rest piece. If they do, please contact us at 1-800-928-5158 for further assistance.
Question:
Q:I have a truck 20019 tundra I put the front seats but I have hard time to fit the rear cause the rear seat do not bend Can you help me to see how to do that I see some of your videos none that can come close to the problem that I have ? It is a split seat but only the bottom coms up the top do not moove on the rear .
Answer:
A: Thank you for your interest. Please keep in mind, these are universal, so we cannot guarantee a perfect fit The only option in this case will be to tuck the material into the crevices as best as possible with a flat item such as a card.
Question:
Q:How do I install the back bench cover if there seats fold up from the bottom interest of down from the bottom
Answer:
A: Thank you for your inquiry. This should be accommodated with the split bench function and the installation should be the same. If you'd like, you can send photos to [email protected] so we can see better what you're referring to and offer more assistance.
Question:
Q:How do I order the mesh cloth?
Answer:
A: Thank you for your inquiry. All our bench seat covers do come with one set of mesh pieces to cover 2 splits. If you need an additional set, we can certainly help you with that! A representative will contact you directly.
Question:
Q:I ordered this and only got two pieces for the back. It shows 4 pieces...this doesn't seem right.
Answer:
A: Thank you for your inquiry. Our sets do come with one set of the mesh pieces to split into two pieces. We find that on average, most people only use one top and one bottom split or two top splits. However, we know some customers do use more than that. We can definitely help with this. We will reach out to you directly to assist on this.
Question:
Q:Hi My bmw back seat is split in spots- there is a central backrest that can be lowered down as cup holder... i purchased the below - Can it by setup correctly so i can use the central back rest so i can lower it to use it as cup holder FH Group FB030BEIGEBLACK115 full seat cover (Side Airbag Compatible with Split Bench Beige/Black) https://www.amazon.com/dp/B01HUTS8G6/ref=cm_sw_r_cp_api_i_6d99EbQAKMKSB - Ujjval
Answer:
A: Thank you for contacting us. These seat covers are universally designed to fit a wide variety of vehicles but are not customized for any vehicle in particular. These covers are split bench compatible and will work with any split as well as allow you to use your center console.
Question:
Q:the second and third row seat covers are much to short. the go across the top half but not the sitting area. what happened?
Answer:
A: Thank you for your inquiry. Please be advised that this item is a universal seat cover that is not custom designed to fit a specific vehicle. These do come in one size and are not tailored for particular cars. We do offer extension pieces. Please call 1-800-928-5518 for more assistance.
Question:
Q:2013 Honda Ridgeline how do I install the rear seat back? Is the only method to tuck the excess into the sides, top, and bottom?
Answer:
A: Thank you for your inquiry. This is the simplest method. You can remove your seat to install as well. If your rear seats are split bench, it is best to connect the straps behind the seats. https://www.youtube.com/watch?v=ivv1vU2JoOc&feature=emb_logo
Question:
Q:I Have 2017 Tacoma How Do You Install The Rear Seat Cover To The Split Seats And How Many Mesh Coverings Should I Have.
Answer:
A: Thank you for your inquiry. Our rear seat covers come with one set of mesh pieces. We can always help you get an additional set or sets. Please contact us at [email protected]
Question:
Q:How many pieces of the mesh for the split bench was I supposed to get? I needed 2 but it only came with one
Answer:
A: Thank you for your inquiry. Our bench seat covers come with one set of mesh pieces. If you need an additional set or sets, we can assist you. Please contact us at [email protected] with your order number.

Ask a Question

X