Installation

A: Our seat covers are specifically designed to not interfere with armrests. Just remove the armrests when you install the seat covers, and put them back when you're done.It's that easy. For more detailed instructions, check out our installation instructions. Please note that at the moment, armrest covers are not included in our seat cover sets or accessory sets, but you can buy them separately here.

A: Thank you for your inquiry. Our seat covers do not specifically accommodate this feature. The covers are universally made and cannot provide this option as it would not be the same on every vehicle. For customers who do experience the seat covers covering their seat control buttons, they find they are still able to use these features through the seat covers, while others have made slits to reveal these buttons.

A: Thank you for your inquiry. We do not have installation videos for specific vehicles. Our seat covers are universally designed to fit many different vehicles. Our seat covers can be installed the same general way on any car. If you are looking for more information in regards to the Airbags, we can provide more information. Feel free to call us at 1-800-928-5518 for more help.

A: Thank you for your inquiry. Depending on which seat cover you have, removing the headrests is required. If your headrest should be removable but you are having trouble, please try calling the dealership or a mechanic for more assistance.

A: Thank you for your inquiry. For this item we currently only have an instruction manual. https://www.fhgroupauto.com/seat-cushion-installation/ Please scroll to the bottom for the PDF.

A: Thank you for your inquiry. The arm rests must be completely removable in order to install the covers. Once you have slipped them on to your front seats, you can cut a small hole where the arm rests go in order to put them back in.

A: Thank you for your interest. You can refer to our bench seats: https://www.fhgroupauto.com/category/semi-custom-seat-covers/?pa_set-placement=bench-seat-covers

A: Thank you for your interest. Your arm rests must be completely removable in order to install the covers. Some are able to be pulled up with some force, while others will need a bolt inside to be unscrewed. After you have installed the covers, you can make small cuts to the fabric to place the arm rests back in place.

A: Thank you for contacting us. Some arm rests can be removed by simply pulling them out, while others will need to have a bolt inside of the arm rest unscrewed. If there is no way for you to remove them, you can call us at 1-800-928-5518 for further assistance.

A: Thank you for your inquiry. The discs and hooks are to hold the seat cushions in place. You hook the discs on to the straps at the bottom of the back rest, and slide it through the gap of your seat to the other side to set it in place. The hooks are for the straps at the bottom of the seat to hook on to any metal bars that are under. You may take a look a this video for more information: https://www.youtube.com/watch?v=0D8mi5ikmmI&list=PLtUfhq8TihlY9DWb6Wwg4WwY67w_K-2Wt

A: Thank you for your inquiry. The installation requires fully detachable headrests and the seat belts must be attached to the wall of the vehicle. Please note our products are universal, meaning they are designed for a wide range of vehicles, and not any particular model and year. Please ensure that both front and rear headrests, as well as armrests if any are removable prior to installing the covers. Please keep in mind that we do not guarantee a perfect fit since these covers are universal.

A: Thank you for your comment. Please send us an email to [email protected] so that we can further assist you.

A: If you can, try to reach underneath the back of the seat to see if there is a way to unhook the flap. If so, you can push them through but they will not fully come out the back. If not, you will need to reply on tucking the covers into the crevices.

A: Thank you for contacting us. The stripes on the sides of our cosmopolitan seat covers are designed to upgrade the look of your interior. They are for a more sporty appearance. The hooks that were provided can be used to loop on to the straps that are on the sides of the seat bottom. Then, you can hook them on to any metal bar that is found underneath the seat in order to secure them in place.

A: Thank you for contacting FH Group. Each of our items have what we call a SKU number. It is used to identify each product. The SKU numbers can be found on the listing on our website under the title, the packing slip with the list of what products you ordered or on the packaging under the barcode. Most of our products start with FH, FB, PU.

A: Thank you for that information. Unfortunately all vehicles are made different and sometimes universal seat covers cannot work for all makes and models. In this case, we would recommend trying to tie the straps to the sides underneath. Otherwise, unfortunately our seat covers may not work for your vehicle.

A: Hi, Thank you for contacting us. A customer service rep will be reaching out to you shortly.

A: Thank you for your inquiry. If you have the flap in the back of your seat, you should be able to reach underneath and unhook this. This will then allow you to push through the straps and any necessary tools.

A: Thank you for contacting FH Group. We have provided the installation for the front seat covers down below. Please note, this is a general installation and will not have your exact car or seat covers but will be installed the exact same way. https://www.youtube.com/watch?v=52dkjcaZbko

A: Thank you for contacting FH Group. Our Airbag compatible covers are specifically designed to have a driver side and passenger side. The side where airbag compatible label is, also has the special stitching that allows the airbag to deploy. When installing, the tag should be facing out towards the side window.

A: Thank you for contacting FH Group. When installing the cover, you would need to pull the long straps through the crevice of the seat cover and pull them through the back and then under the seat. You would then attach the straps to the buckles in the front of the seat cover. Once those have been attached, you would take the clips and attach those to the loops on the side of the cover and hook them to the straps you have previously attached. Please let us know if you have any further questions.

A: We're glad you make this done.

A: Thank you for contacting FH Group. We understand your concern. Please note our covers are universal and made for a wide range of vehicles. To properly install this cover, you would need to remove all armrests on the seats. Once the covers are on, you can make 2 small holes to attach the armrests back on.

A: Thank you for contacting FH Group. We understand your concern. Please note, our split benches only come with 1 set of mesh pieces. Additional sets would be a small additional charge. Please contact us at [email protected] or give us a call at 201-210-2426 if you would like to purchase this.